EQUIPE RS LE HOUDINI Roadsuit S11

USD 435.00
The ultimate road racing speedsuit, refined with lower weight, increased aerodynamics, and a subtle gradient fade of the ASSOS griffe.
SELECT SIZE
SELECT SIZE

Legs 80%Polyamide 20%Elastane; Front Panel 90%Polyester 10%Elastane; Sleeve 80%Polyester 20%Elastane; Pocket Ramp 94%Polyamide 6%Elastan; Pocket 76%Polyamide 24%Elastane; Back Insert 100%Polyester; Pocket Insert, Padding Insert 85%Polyester 15%Elastane

Within thirty (30) days of receipt.

Payment processed in a secure environment

Behind the product
Engineered in collaboration with Tudor Pro Cycling and the Swiss Cycling Federation, the S11 generation of the LE HOUDINI Roadsuit is lighter, more breathable, and more aerodynamic than its predecessors – critical properties for racing and training in hot conditions. The butterfly-wrap S11 pattern creates gains in compression and stability while simultaneously increasing comfort – especially in aggressive riding positions. The S11 Insert follows the same theme of increased comfort, incorporating the frictionless goldenGate 2.0 construction with an ultrasoft, antimicrobial top sheet and 360-degree cooling airflow. A full-length front zipper adds convenience to comfort, facilitating natural breaks.

Technology overview

The finer details

FEATURED FABRICSThe jersey portion's Hill Rombo is a lightweight, breathable textile with proven aerodynamic gains in the wind tunnel. On the sleeves, 550CX provides similar drag reduction with a breathable and highly elastic second-skin fit. Type.911 is the same textile on the EQUIPE RS S11 bib shorts, employed here for silky-smooth compression and abrasion-resistance on the shorts section. It also dries quickly, preventing weight gained through lingering moisture, and it's equipped with UPF 50+ protection and odorControl.
CONSTRUCTION/FITOur most aggressive, most aerodynamic equipment. The legs are cut longer than our typical racingFit design, and the zeroNeck construction is more open than our standard RS Jerseys, allowing easier breathing during high-intensity efforts.
ENGINEERING

Radio Pocket:
Radio storage and internal cable routing maintain clean aerodynamics.
ENGINEERING

Soft compression Module:
Provides muscle-enveloping, omnidirectional compression and stability with a waist construction that eliminates restriction in aggressive riding positions.
ENGINEERING

Bonded + Raw Cut:
Bonded seams and raw-cut legs eliminate bulk and reduce drag and irritation.
ENGINEERING

skinGrip Finish:
Anti-slip finishing secures the legs in place without excessive pressure
RS S11 Insert

Shock-Absorb Damping System Mono:
Compressive foam materials in a single-layer 9mm racing platform that minimizes volume and weight. Thermoformed shaping eliminates ridges and irritation.
RS S11 Insert

3D Waffle:
A patented, three-layer, perforated foam that increases breathability and eliminates excess weight.
RS S11 Insert

kraterCooler:
Perforations in the inserts' leading edge draw intercooling air to maintain breathability and a dry, cool microclimate.
RS S11 Insert

goldenGate 2.0:
The insert is attached at front and rear with floating sides and center, letting it move with your body rather than against it. New cut-outs on the sides reduce volume and friction throughout the pedal stroke.

Mineral Tec Surface:
A soft, ultrasmooth coversheet that reduces friction and irritation while promoting comfort with quick-drying properties and permanent odorControl.

whirlKrater:
Perforations strategically distributed throughout the insert, creating a whirlwind of cooling airflow instead of just a unidirectional breeze.

WHEN/HOW TO USE IT

Pair with the RSR Speed layering system for the ultimate racing performance.

USD 55.00
USD 95.00
USD 100.00